Safety Procedures for Bunching Machine

Bunching machine is a kind of machinery and equipment used to produce wire bundles and cables. Its main function is to polymerize several separate wires into one bundle. The process is divided into round and sector twisting, which can be distinguished by cutting the bundle after polymerization and observing its cross-section.

Currently, there are two types of Bunching machines on the market, Single Twist bunching machines, and Double twist bunching machines.

Single Twist bunching machine

The advantage of the single-twist bunching machine is that the winder rotates around its central axis. The production speed to be achieved is much higher compared to a drum-twisting machine. The production speed to be achieved is much higher compared to a drum-twisting machine. The single-twist poly binder limits the bending radius of the individual input product. Million per minute. The achievable bending radius of a single conductor is greater than the bending radius inside the single twister. Another production method must be chosen, e.g., drum twister. The single twister can achieve good twisting results over the entire production length thanks to modern control technology.

Double twist bunching machine

The double-twist buncher twists two strands in sequence on the bow. A reel or spool is installed in the double-twist buncher, and the bow rotates around the payoff. The individual product gains are outside the machine. The machine usually has a housing. In addition to the bobbin, the barrel can be used as a single-thread payoff. The individual elements are located outside the machine housing and reach the bottom plate at the front of the machine. Starting from the lay plate, they pass through the bow and add two twists before entering the bobbin or drum.

Safe operating procedures for Bunching machine

Safety in production is the lifeline of a company, and it is everyone's responsibility to work safely. As employees of the enterprise, we can't think that safety inspection is not related to ourselves, so we ignore it, and we can't take the attitude of indulging in self-interest and neglecting when we find the hidden danger of accidents. Because only when everyone participates in safety management can accidents be eliminated, and the interests of the enterprise and brakes can be protected.

1. Operators should receive some operation training before the operation starts;

2. Operators should wear clean and neat work clothes when they enter the workshop and tie up the women and their hair to prevent accidents from winding up in the machine;

3. The plate on and off the plate should be careful not to crush the hands and feet;

4. The dangerous part of the machine should be added to the shield. If necessary, the operation should be used when the appropriate protective equipment;

5. Machinery should be frequently maintained, and maintenance or mechanical failure should be hung with warning signs and power off to prevent accidental use of machinery. After each repair should be done mechanical records;

6. Clean machinery and repair machinery with cloth and other items must be placed in a self-contained waste barrel to prevent fire. 7. office hours without alcohol, operating machinery to be sober-minded, focusing on operating machinery, fatigue to pay attention to the operation or stop, and prevent unnecessary safety accidents.

7. Machine parts have fragile. In the operation of the machine, failure should use the machine emergency stop switch to immediately stop the operation from reducing losses or safety accidents.

8. When the workshop has a total power control room, set up a protective net (pole) and hang the "do not approach" sign.

9. All kinds of wires and workshop equipment wires can not be thrown at a moment and are not allowed to build on the wire, hanging and hooked on various items.

10. Production workshop lighting should meet the requirements. Operators and operators should be free of dark corners.

11. Foreign personnel shall not enter the production. If they need to enter the workshop, they should be led by the workshop staff.

12. When maintaining the equipment, gasoline should not be welded in the workshop or the clean parts; if necessary, there should be a person in charge of monitoring.

13. No open flame, no smoking, and no flammable and explosive materials stacked in the workshop production.

14. When the workshop is shut down for maintenance, the power control area should be hung with the sign "not to close the working gate."

15. The workshop crane is responsible for the operation of the crane; the environment is not allowed to allow standing in when lifting industry.

16. After the accident is removed, the cause of the accident shall not continue production after it is not identified.

17. All electrical equipment in the production plant should have a person in charge of the custody of the operation and the development of safe production operating procedures.

Purchase high-quality bunching machines; choose the professional bunching machine manufacturer - Zhaohong.