Views: 14 Author: Site Editor Publish Time: 2022-11-07 Origin: Site
Bunching machine is mainly used for plastic, rubber, cable, stranded bare copper wire, and aluminum wire cores, with an automatic up-and-down reel mechanism. Easy and safe operation. It is a kind of equipment used to strand copper soft or other soft wire cores. It is a kind of fast stranding speed and regular stranding according to a certain length (i.e., pitch), which is convenient for covering plastic or rubber when producing electric wires.
The wire bunching machine comprises a machine cover, frame, frequency-controlled drive motor, bow-type stranding frame, inlet shaft, worm gear drive, traction, light bar row, and hydraulic manual up-and-down bobbin device.
Main technical parameters of the bunching machine
1. Specification of winding reel: PN400
2. Monofilament diameter: 0.15-0.50 mm
3. bundle outside diameter: 0.5 ~ 8mm bundle wire cross-section: 0.3 ~ 16mm square
4. Host speed: 100-1000r.p.m
5. Maximum production speed: 150m/min
6. twisting direction: left and right are available
7. motor: frequency converter 4kw
8. Bearing: FAG or NSK P5
9. Noise Level: About 75D.B
10. Weight: About 1800 kg
11. Dimension: L×WxH(mm)2570x1310x1350
Bunching machine configuration
1. Bunching machine (with frequency conversion control cabinet, left and right steering, pitch wheel, manual lifting disk tool, wire rower GP20 type)
2. 50 heads of rising force wire release frame (spring adjusts the elasticity)
3. Wire reel: below Φ160mm, above Φ80mm.
Bunching Machine Operation rules
1. After installation, check whether the machine is stable and reinforce any dangerous places found.
2. Before starting the machine, do an excellent job of slow rotation for 10 minutes. After stopping the machine, check whether the parts are firm and whether there is a lack of oil in the lubricating parts, where the problems checked are solved.
3. Following the production of copper soft stranded wire specifications, the number of strands and wire diameter are ready to bundle the wire before the preparation. Ready to strand the copper wire by stranding into the shaft hole penetration, by stranding over the wire wheel into the bow ring wire wheel, and then into the wheel so that the stranded wire by the traction wheel, light bar line wrapped around the disk tool. Adjust the required pitch.
4. The configuration of the wire bundling machine is frequency-controlled and speed-controlled, using ordinary motors. The copper wire from the wire bundle installed on the wire tray (user-provided) is introduced into the wire bundle machine by hand. The wire bundle should be rotated slowly so that the copper wire introduced does not stop when the machine is turned on and can operate normally.
5. The hydraulic lifting system adjusts the upper and lower bobbins to make the loading and unloading of bobbins more convenient. At the end of the bobbin installation, the operating lever should be placed in the original position so that the bow-shaped circle and the upper and lower bobbin work plane are away from the work to prevent foreign objects from under the work plate.
6. Install the bobbin so that the bobbin rotates flexibly between the top wheels, and each time the bobbin is installed, attention should be paid to whether the locking nail is tightened so that the bobbin falls off between the top wheels causing the collision with the bow ring resulting in damage to the machine.
7. bundle wire machine stranding, the transmission of the collection plate by the front friction wheel friction slip, and the friction wheel on the friction belt should be adjusted to adapt to the stranded bundle wire warp.
Customized, purchase bunching machine, welcome to contact professional bunching machine manufacturer - Zhaohong Machinery.
